Nanosponges: As a Dynamic Drug Delivery Approach for Targeted Delivery

Recent advancements in nanotechnology have resulted in improved medicine delivery to the target site. Nanosponges are three-dimensional drug delivery systems that are nanoscale in size and created by cross-linking polymers. The introduction of Nanosponges has been a significant step toward overcoming issues such as drug toxicity, low bioavailability, and predictable medication release. Using a new way of nanotechnology, nanosponges, which are porous with small sponges (below one microm) flowing throughout the body, have demonstrated excellent results in delivering drugs. As a result, they reach the target place, attach to the skin's surface, and slowly release the medicine. Nanosponges can be used to encapsulate a wide range of medicines, including both hydrophilic and lipophilic pharmaceuticals. The medication delivery method using nanosponges is one of the most promising fields in pharmacy. It can be used as a biocatalyst carrier for vaccines, antibodies, enzymes, and proteins to be released. The existing study enlightens on the preparation method, evaluation, and prospective application in a medication delivery system and also focuses on patents filed in the field of nanosponges.Copyright © 2023 The Authors.

Prospects of TiO2-based photocatalytic degradation of microplastic leachates related disposable facemask, a major COVID-19 waste

COVID-19 is one of the serious catastrophes that have a substantial influence on human health and the environment. Diverse preventive actions were implemented globally to limit its spread and transmission. Personnel protective equipment (PPE) was an important part of these control approaches. But unfortunately, these types of PPE mainly comprise plastics, which sparked challenges in the management of plastic waste. Disposable face masks (DFM) are one of the efficient strategies used across the world to ward off disease transmission. DFMs can contribute to micro and nano plastic pollution as the plastic present in the mask may degrade when exposed to certain environmental conditions. Microplastics (MPs) can enter the food chain and devastate human health. Recognizing the possible environmental risks associated with the inappropriate disposal of masks, it is crucial to avert it from becoming the next plastic crisis. To address this environmental threat, titanium dioxide (TiO2)-based photocatalytic degradation (PCD) of MPs is one of the promising approaches. TiO2-based photocatalysts exhibit excellent plastic degradation potential due to their outstanding photocatalytic ability, cost efficiency, chemical, and thermal stability. In this review, we have discussed the reports on COVID-19 waste generation, the limitation of current waste management techniques, and the environmental impact of MPs leachates from DFMs. Mainly, the prominence of TiO2 in the PCD and the applications of TiO2-based photocatalysts in MPs degradation are the prime highlights of this review. Additionally, various synthesis methods to enhance the photocatalytic performance of TiO2 and the mechanism of PCD are also discussed. Furthermore, current challenges and the future research perspective on the improvement of this approach have been proposed.

Aerosol charge neutralization and its impact on particle filtration efficiency of common face mask materials

Despite the significant increase in research on mask filtration testing since the COVID-19 pandemic, there remains considerable ambiguity regarding which parameters affect particle filtration efficiency (PFE) and how differences in standard testing protocols can lead to divergent PFE values. We evaluated the PFE (and differential pressure) of several common face masks and community face mask materials including woven cotton, spunbond polypropylene, and meltblown polypropylene, testing in accordance with ASTM F2100/2299 standards for medical masks, using polystyrene latex (PSL) aerosol, as well as NIOSH standards for respirators, using NaCl aerosol. In both cases, PFE was measured with and without aerosol charge neutralization, which is used to bring the particle population to a known, equilibrium bipolar charge distribution. Aerosols of either composition that were not neutralized (untreated) led to significant increases in measured PFE, especially in the case of PSL. In contrast, effective neutralization led to lower PFE measurements that also showed little to no dependence on aerosol composition across most materials. To investigate further, the bipolar charge distributions of PSL and NaCl aerosols, both neutralized and untreated, were characterized using an aerodynamic aerosol classifier operated in tandem with a scanning mobility particle sizer (AAC-SMPS). This technique illustrated the differences in the distribution of particle charge states between PSL and NaCl aerosols of the same size, and between PSL particles of different sizes, revealing the presence of highly charged particles in many cases. Most importantly, the equilibrium charge distribution after neutralization is shown to be independent of particle composition or initial charge distribution, highlighting the crucial role of aerosol charge neutralizers in preventing overestimates of mask performance (due to electrostatic effects) and promoting consistency in standard testing procedures.

COVID-19 Waste as Source of Microplastics in the Environment: Implication for Aquatic Species, Human, and Remediation Measures- A Review

Coronavirus (COVID-19) pandemic ushered in a new era that led to the adjustments of diverse ecosystems. The pandemic restructured the global socio-economic events which prompted several adaptation measures as a response mechanism to cushion the negative impact of the disease pandemic. Critical health safety actions were impera-tive to curtail the spread of the disease such as wearing personal protective equipment (PPEs), masks, goggles, and using sanitizers for disinfection purposes. The daily de-mands for the products by individuals and medical personnel heightened their pro-duction and consumption, leading to a corresponding increase of COVID-19 wastes in the environment following indiscriminate waste disposal and poor waste management. The persistent occurrence of COVID-19 wastes aggravated microplastics (MPs) con-tamination in the aquatic ecosystem following the breakdown of PPEs-based plastics via oxidation, fragmentation, and photo-degradation actions. These MPs are transport-ed in the aquatic environment via surface runoff and wind action, apart from discrete sources. MPs' presence in the aquatic systems is not without repercussions. Ingestion of MPs by aquatic organisms can cause several diseases (e.g., poor growth, oxidative distress, neurotoxicity, developmental toxicity, reproductive toxicity, immunotoxicity, and organ toxicity). Humans are at high risk of MPs uptake. Apart from aerial and soil contamination sources, consumption of aquatic food products is a critical pathway of MPs into the human body. MP toxicities in humans include liver disorder, respiratory failure, infertility, hormonal imbalance, diarrhea, developmental disorder, and mortal-ity. Measures to alleviate the effect of COVID-19 waste litters include effective waste management plans and the adoption of technologies to extract cum degrade MPs from the aquatic and terrestrial environment.

Quantitative analysis of polystyrene microplastic and styrene monomer released from plastic food containers.

Since the COVID-19 outbreak, the use of disposable plastics has rapidly increased along with the amount of plastic waste. During fragmentation, microplastics and other chemical substances contained in plastics are released. These then enter humans through food which could be problematic considering their hazardous potential. Polystyrene (PS), which is widely used in disposable containers, releases large amounts of microplastics (MPs), but no studies have investigated the release mechanisms of PS-MPs and simultaneously exposed contaminants. Therefore, in this study, the effects of pH (3, 5, 7, and 9), temperature (20, 50, 80, and 100 °C), and exposure time (2, 4, 6, and 8 h) on MPs release were systematically examined. A quantitative/qualitative study of MPs and styrene monomers was performed using microscopy-equipped Fourier-transformed infrared spectroscopy and gas chromatography-mass spectrometry. The release of PS-MPs (36 items/container) and simultaneously exposed pollutants (SEP), such as ethylene glycol monooleate (EGM), was highest at pH 9, 100 °C, and 6 h, which was proportional to the test temperature and time. Under the same conditions, 2.58 µg/L of styrene monomer migrated to the liquid food simulants. The fragmentation was proceeded by oxidation/hydrolysis and accelerated by increased temperature and exposure time. The strong positive correlation between PS-MPs and SEPs releases at pH and temperature indicates that PS-MPs and SEPs follow the same release process. However, a strongly negative correlation between PS-MPs and styrene monomers at the exposed time shows that styrene migration does not follow the same release process, but does its partition coefficient.

Topical review on nano-vaccinology: Biochemical promises and key challenges.

Nanomaterials have wide-ranging biomedical applications in prevention, treatment and control of diseases. Nanoparticle based vaccines have proven prodigious prophylaxis of various infectious and non-infectious diseases of human and animal concern. Nano-vaccines outnumber the conventional vaccines by virtue of plasticity in physio-chemical properties and ease of administration. The efficacy of nano-based vaccines may be attributed to the improved antigen stability, minimum immuno-toxicity, sustained release, enhanced immunogenicity and the flexibility of physical features of nanoparticles. Based on these, the nano-based vaccines have potential to evoke both cellular and humoral immune responses. Targeted and highly specific immunological pathways required for solid and long lasting immunity may be achieved with specially engineered nano-vaccines. This review presents an insight into the prevention of infectious diseases (of bacterial, viral and parasitic origin) and non-infectious diseases (cancer, auto-immune diseases) using nano-vaccinology. Additionally, key challenges to the effective utilization of nano-vaccines from bench to clinical settings have been highlighted as research domains for future.

Thermal Comfort Analysis Using System Dynamics Modeling—A Sustainable Scenario Proposition for Low-Income Housing in Brazil

As a riveting example of social housing in Brazil, the Minha Casa Minha Vida program was set in 2009 to diminish the 6-million-home housing deficit by offering affordable dwellings for low-income families. However, recurrent thermal discomfort complaints occur among dwellers, especially in the Baltimore Residential sample in Uberlândia City. To avoid negative effects of energy poverty, such as family budget constraints from the purchase of electric appliances and extra costs from power consumption, a simulation based on system dynamics modeling shows a natural ventilation strategy with a mixed combination of sustainable and energy-efficient materials (tilting window with up to 100% opening, green tempered glass, and expanded polystyrene wall) to observe the internal room temperature variation over time. With a 50% window opening ratio combined with a 3 mm regular glass window and a 12.5 cm rectangular 8-hole brick wall, this scenario presents the highest internal room temperature value held during the entire period. From the worst to the best-case scenario, a substantial reduction in the peak temperature was observed from window size variation, demonstrating that natural ventilation and constructive elements of low complexity and wide availability in the market contribute to the thermal comfort of residential rooms.

Assessment of different laboratory tests for the diagnosis of novel coronavirus infections

Rapid diagnosis of coronavirus disease 2019 (COVID-19)-infected patients is urgent in making decisions on public health measures. There are different types of diagnostic tests, such as quantitative PCR assay, antibody, and antigen-based and CRISPR-based tests, which detect genetic materials, viral proteins, or human antibodies in clinical samples. However, the proper test should be highly sensitive, quick, and affordable to address this life-threatening situation. This review article highlights the advantages and disadvantages of each test and compares its different features, such as sensitivity, specificity, and limit of detection to reach a reliable conclusion. Moreover, the FDA- authorized kits and studies' approaches toward these have been compared to provide a better perspective to the researchers.Copyright © 2022 Lippincott Williams and Wilkins. All rights reserved.

Development of Polymeric Binder from Expanded Polystyrene (EPS) Foam Waste as Construction Materials

Expanded Polystyrene (EPS) foam wastes become a huge environmental issue as most of them are non-biodegradable materials and are disposed of inappropriately. It was reported that the amount of plastic and foam wastes for food containers and other packagings was evidently increased during the past 5 years, especially since the COVID19 pandemic. This work studied the development of the polymeric foam binder from the EPS foam waste for the production of green construction blocks or pavement tiles. The types of solvent (acetone and toluene) and the amount of additional EPS foam binder were investigated. The results show that the appropriate mixtures contained EPS foam binder from 15% to 30% to achieve maximum compressive strength at approximately 10 to 12 MPa with the optimal unit weight of 1,600 to 1,900 kg/m3. Those outcomes have equally passed the strength class of Thai Industrial Standard (TIS 57 and 77) for construction brick and block. This eco-friendly technique could facilitate value-added production and reduce the environmental impact of EPS wastes disposal. Moreover, it is one of the alternative approaches to promote greener and cleaner production for environmentally friendly construction materials.

Fluorophore-encapsulated nanobeads for on-site, rapid, and sensitive lateral flow assay.

Since December 2019, the rapid and sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has become a priority for public health. Although the lateral flow assay (LFA) sensor has emerged as a rapid and on-site SARS-CoV-2 detection technique, the conventional approach of using gold nanoparticles for the signaling probe had limitations in increasing the sensitivity of the sensor. Herein, our newly suggested methodology to improve the performance of the LFA system could amplify the sensor signal with a facile fabrication method by concentrating fluorescent organic molecules. A large Stokes shift fluorophore (single benzene) was encapsulated into polystyrene nanobeads to enhance the fluorescence intensity of the probe for LFA sensor, which was detected on the test line with a longpass filter under ultraviolet light irradiation. This approach provides comparatively high sensitivity with the limit of detection of 1 ng mL-1 for the SARS-CoV-2 spike protein and a fast detection process, which takes less than 20 min. Furthermore, our sensor showed higher performance than gold nanoparticle-based commercial rapid diagnostics test kits in clinical tests, proving that this approach is more suitable and reliable for the sensitive and rapid detection of viruses, bacteria, and other hazardous materials.

From city to sea: Spatiotemporal dynamics of floating macrolitter in the Tiber River

Rivers are undoubtedly the main pathway of waste dispersed in the environment that from land reaches oceans and seas increasing the amount of marine litter. Major cities are a great source of riverine litter as large urbanization can originate pressure on the integrated waste management resulting in litter entering the rivers. Within this study, we aim to investigate the dynamic of floating riverine macrolitter (items >2.5 cm) in the city of Rome before it reaches the sea by assessing the composition, amount, and seasonal trends of litter transported from the urban centre to the main river mouth of Tiber River. Visual surveys for a whole year (March 2021–February 2022) were conducted from two bridges, Scienza Bridge (in the city) and Scafa Bridge (at the main river mouth) and followed JRC/RIMMEL protocol for riverine litter monitoring. Overall, similar litter composition was observed from the city centre to the mouth with a prevalence of plastic material, mainly related to fragmentation process (i.e. plastic pieces) and single use items, mainly in food and beverage sectors. An extrapolated annual loading of 4 × 105 items/year was estimated at the main mouth of Tiber River. The litter flux seems to be influenced by the seasonal variability and hydrometeorological parameters. The frequency of size classes decreases with increasing size in both sites, and more than half of the recorded items were below 10 cm. Specific categories belonging to "other plastics” have been reported related to anti-Covid-19 behaviour such as face masks and beverage sector, e.g. bottle lids and rings. The main colour of plastics was white, suggesting weathering process of floating riverine litter. This study contributes to increasing knowledge of the origin, composition and spatiotemporal dynamics of riverine floating litter from the city and entering the sea. © 2022 Elsevier B.V.

Simple fabrication of an electrospun polystyrene microfiber filter that meets N95 filtering facepiece respirator filtration and breathability standards.

During the global spread of COVID-19, high demand and limited availability of melt-blown filtration material led to a manufacturing backlog of N95 Filtering Facepiece Respirators (FFRs). This shortfall prompted the search for alternative filter materials that could be quickly mass produced while meeting N95 FFR filtration and breathability performance standards. Here, an unsupported, nonwoven layer of uncharged polystyrene (PS) microfibers was produced via electrospinning that achieves N95 performance standards based on physical parameters (e.g., filter thickness) alone. PS microfibers 3-6 µm in diameter and deposited in an ~5 mm thick filter layer are favorable for use in FFRs, achieving high filtration efficiencies (≥97.5%) and low pressure drops (≤15 mm H2O). The PS microfiber filter demonstrates durability upon disinfection with hydroxyl radicals (•OH), maintaining high filtration efficiencies and low pressure drops over six rounds of disinfection. Additionally, the PS microfibers exhibit antibacterial activity (1-log removal of E. coli) and can be modified readily through integration of silver nanoparticles (AgNPs) during electrospinning to enhance their activity (≥3-log removal at 25 wt% AgNP integration). Because of their tunable performance, potential reusability with disinfection, and antimicrobial properties, these electrospun PS microfibers may represent a suitable, alternative filter material for use in N95 FFRs.

Call for biotechnological approach to degrade plastic in the era of COVID-19 pandemic.

Plastic pollution is a global issue and has become a major concern since Coronavirus disease (COVID)-19. In developing nations, landfilling and illegal waste disposal are typical ways to dispose of COVID-19-infected material. These technologies worsen plastic pollution and other human and animal health problems. Plastic degrades in light and heat, generating hazardous primary and secondary micro-plastic. Certain bacteria can degrade artificial polymers using genes, enzymes, and metabolic pathways. Microorganisms including bacteria degrade petrochemical plastics slowly. High molecular weight, strong chemical bonds, and excessive hydrophobicity reduce plastic biodegradation. There is not enough study on genes, enzymes, and bacteria-plastic interactions. Synthetic biology, metabolic engineering, and bioinformatics methods have been created to biodegrade synthetic polymers. This review will focus on how microorganisms' degrading capacity can be increased using recent biotechnological techniques.

An impedimetric immunosensor based on PAMAM decorated electrospun polystyrene fibers for detection of interleukin-10 cytokine

Cytokine storms are known as the uncontrolled overproduction of inflammatory cytokines that can be produced by a variety of viral or non-infectious disorders and inflict significant damage to many organs. Interleukin-10 (IL-10) is an anti-inflammatory cytokine, and rapid detection of its levels in serum and saliva is important for many diseases, including severe COVID-19 patients. In this study, Polystyrene (PS) fibers were electrospun over a gold electrode and modified by air plasma to allow their further decoration with polyamidoamine (PAMAM) dendritic polymer for providing many active sites on the fiber surface. The fabricated three-dimensional (3-D) architecture was employed as a platform in an impedimetric immunosensor for the quantitative detection of interleukin-10 cytokine (AgIL-10). Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), contact angle measurements, fluorescence microscopy, UV–vis spectroscopy, and electrochemical methods including cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterized the proposed electrospun fiber-based platform and electrochemical immunosensor. The PAMAM properties increased not only the amperometric response to the ferro/ferri cyanide redox probe, of the modified gold electrode but also the active surface area available for covalently binding of anti-IL-10 capture antibody, resulting in the sensitive detection of AgIL-10 in the concentration range of (1-50 pg/mL) in phosphate buffer saline (PBS) with a limit of detection (LOD) of 1 pg/mL. The immunosensor's performance in detecting AgIL-10 in artificial saliva (AS) as a complex medium was likewise satisfactory. This immunosensor provides a new opportunity for clinical immunoassays thanks to its great sensitivity,selectivity, andstability.

Improving the Separation of PS and ABS Plastics Using Modified Induced Air Flotation with A Mixing Device

A dramatic increase in plastic waste has resulted in a strong need to increase plastic recycling accordingly. A selective flotation has been highlighted due to its outstanding efficiency for the separation of mixed plastics with analogous physicochemical characteristics. In this study, the effects of design and operational factors on the bubble’s hydrodynamic and mixing parameters in induced air flotation (IAF) with a mixing device were investigated through a design of experiment method (DOE) analysis for improving the plastic separation efficiency (i.e., PS and ABS). As a result of DOE analysis, the increase in the induced air tube diameter together with the rotational speed could generate a smaller bubble size. This led to the enhancement of the ratio of interfacial area to velocity gradient (a/G), which was interestingly found to be a significant factor affecting plastic recovery apart from the chemical agents. It demonstrates that operating IAF with a mixing device at a greater a/G ratio improved the plastic separation performance. These findings suggest that operating an IAF process with a mixing device at suitable a/G conditions could be a promising technique for separating plastic wastes, which have similar physicochemical characteristics as PS and ABS.

3D Position Nanometrology of a Coronavirus-like Nanoparticle with Topologically Structured Light

Scattering of topologically structured light is highly sensitive to the position of a scattering object. We show that the position of a coronavirus-like 100 nm polystyrene sphere can be measured optically with deeply subwavelength accuracy. © Optica Publishing Group 2022, © 2022 The Author(s)

ASSURED-compliant point-of-care diagnostics for the detection of human viral infections

Viral disease outbreaks have been always a threat to global public health making affordable, rapid and accurate diagnostics highly important tools to slow down the spread of viruses and decrease the mortality rate. Point-of-care (POC) diagnostics have emerged as a strong tool for the diagnosis of viral infections, especially in countries where health-care systems are inadequate to provide proper services to all citizens. According to the World Health Organization, an ideal POC diagnostic must be Affordable, Sensitive, Specific, User-friendly, Rapid/Robust, Equipment-free and Deliverable (ASSURED). This review surveys carefully each ASSURED criterion and identifies where existing viral POC diagnostics fail to meet these criteria. Given the widespread concern with plastic pollution, we also propose the addition of 'disposability' to the existing ASSURED criteria and consider the letter “D” as the representative of both Deliverable and Disposable. Next, the POC tests used for the diagnosis of several common human viral infections which met all the ASSURED criteria (ASSURED-compliant) are described in detail. Finally, the future of ASSURED-compliant POC diagnostics, capable of generating comparable results to the viral diagnostic gold standards, is discussed.

Ontogenetic Transfer of Microplastics in Bloodsucking Mosquitoes Aedes aegypti L. (Diptera: Culicidae) Is a Potential Pathway for Particle Distribution in the Environment

The uptake and accumulation of microplastics (MPs) by bloodsucking mosquitoes Aedes aegypti L., carriers of vector-borne diseases, were investigated in the laboratory. In the experimental group, polystyrene (PS) particles were registered in insects of all life stages from larvae to pupae and adults. Ae. aegypti larvae readily ingested MPs with food, accumulating on average 7.3 × 106 items per larva in three days. The content of PS microspheres significantly decreased in mosquitoes from the larval stage to the pupal stage and was passed to the adult stage from the pupal without significant loss. On average, 15.8 items were detected per pupa and 10.9 items per adult individual. The uptake of MPs by Ae. aegypti did not affect their survival, while the average body weight of mosquitoes of all life stages that consumed PS microspheres was higher than that of mosquitoes in the control groups. Our data confirmed that in insects with metamorphosis, MPs can pass from feeding larvae to nonfeeding pupae in aquatic ecosystems and, subsequently, to adults flying to land. Bloodsucking mosquitoes can participate in MP circulation in the environment.

Aerosol capture and coronavirus spike protein deactivation by enzyme functionalized antiviral membranes

The airborne nature of coronavirus transmission makes it critical to develop new barrier technologies that can simultaneously reduce aerosol and viral spread. Here, we report nanostructured membranes with tunable thickness and porosity for filtering coronavirus-sized aerosols, combined with antiviral enzyme functionalization that can denature spike glycoproteins of the SARS-CoV-2 virus in low-hydration environments. Thin, asymmetric membranes with subtilisin enzyme and methacrylic functionalization show more than 98.90% filtration efficiency for 100-nm unfunctionalized and protein-functionalized polystyrene latex aerosol particles. Unfunctionalized membranes provided a protection factor of 540 ± 380 for coronavirus-sized particle, above the Occupational Safety and Health Administration’s standard of 10 for N95 masks. SARS-CoV-2 spike glycoprotein on the surface of coronavirus-sized particles was denatured in 30 s by subtilisin enzyme-functionalized membranes with 0.02-0.2% water content on the membrane surface.The COVID-19 pandemic highlights the importance of materials that block airborne virus transmission. Here, a nanostructured membrane is shown to filter coronavirus-sized particles, while the membrane surface incorporates enzymes that denature the SARS-CoV-2 spike protein within 30 s.